Authors: Chenxi Wang, Jesus D. Montero Pallares, Mohammad Haftani, Alireza Nouri

Stand-alone screens (SAS) have been widely used in steam assisted gravity drainage (SAGD) operations. Although many researchers investigated the flow performance of SAS through sand control tests, the formation damage (pore plugging) due to fines migration has not been characterized under multi-phase flow conditions. In this study, a methodology is developed to quantify and characterize the fines migration under multi-phase flow sand control testing conditions.

A large-scale sand retention test (SRT) facility is used to investigate the flow performance of SAS. Duplicated sand samples with similar particle size distribution (PSD), shape, and mineralogy properties to the McMurray Formation oil sands are obtained by mixing different types of commercial sands, silts, and clays. Oil and brine are simultaneously injected into the sand-pack at different water-cut levels and liquid rates to emulate the changing inflow conditions in SAGD operations. The saturation levels in each flow stage are measured to determine the relative permeability values. Next, the relative permeability curves of the duplicated sand-pack sample are measured following the steady-state method. Finally, the pressure data obtained from the SRT in each flow stage are coupled with the relative permeability values to calculate the retained permeability as the indicator of flow performance of SAS’.

Generally, testing results show that single-phase oil flow generates minor and negligible permeability impairments in the near-screen zone of the sand-pack. An evident permeability reduction is observed once the water breakthrough happens, indicating that the wetting-phase fluid significantly mobilizes fine particles and causes pore plugging. Also, with the increase of flow rate and water cut, a further reduction in permeability is found as a result of the higher drag force and greater exposure area of fines to brine.

The proposed methodology presented in this study allows quantitative characterization of the formation damage under multi-phase flow condition and provides a practical and straightforward method for the evaluation of the SAS’s flow performance.

Download paper