The Faster, Safer, Stronger Way to Rig Up
Hydraulic fracturing operations lose countless hours to slow, labor‑intensive manifold setup. Traditional API iron is heavy, alignment is tedious, and metal‑to‑metal seals often become leak points.
The DuraLine® V‑Port Manifold from FET Well Stimulation changes everything.
Engineered from the ground up for speed, safety, and simplicity, the DuraLine V‑Port system gets your crews out of setup mode and into pumping faster than ever.
Rig Up in Minutes — Not Hours
We designed every feature of the DuraLine system for rapid deployment.
Mainline connection in under 5 minutes with a single operator
Modular 2‑port pods scale to any pad layout
Duralock™ connectors install with only:
1 bolt on 3-in. hubs
4 bolts on 7-in. hubs
(Compared to 16‑bolt API flanges)
Elastomeric Duralock seals eliminate metal‑to‑metal leak points
Result: Faster alignment, cleaner installations, and dramatically reduced NPT.
Purpose‑Built for Safer, Easier Handling
Traditional iron is heavy. The DuraLine system is not.
Integrated Ajax™ crane enables one‑operator pod handling
Lightweight bonded hoses cut system weight by 60%
No forklifts required in the frac spread
Removes common failure points:
• Hammer unions
• Swivels
• Pup joints
• Mainline flanges
Result: A safer worksite with fewer pinch points, fewer leak paths, and fewer opportunities for equipment fatigue.
A Manifold Designed Around Your Operation
Not all pads are the same. Your manifold shouldn’t be either.
» Add or remove pods to match any site layout
» Configure only the ports you need
» Fully compatible with FET’s high‑pressure bonded hose system
Every component is engineered to work together—no mismatched parts, no legacy compromises, and no unnecessary complexity.
Just a cleaner, more organized, more efficient flowline architecture.
DuraLine V‑Port: At‑A‑Glance
-
-
- Station Design: Modular pod system
- Ports: 2‑port angled entry
- Flowline: FET high‑pressure bonded hoses
- Connections (small bore): 3-in. DuraLock (1 bolt)
- Connections (large bore): 7-in. DuraLock (4 bolts)
- Hammer unions/swivels/pup joints: Eliminated
- Mainline flanges: Eliminated
- Integrated manifold crane: Optional, seamless integration
-
The Future of Manifold Deployment Starts Here
The next-generation manifold technology — designed to get you to the revenue-earning pumping phase faster.
- Reduce weight
- Accelerate rig up
- Minimize leak paths
- Increase operator safety
- Simplify your entire frac spread
The next‑generation manifold technology — designed to get you to the revenue‑earning pumping phase faster.
