Authors: Da Zhu (RGL Reservoir Management Inc.) | Gary Bunio (Suncor Energy) | Ian D. Gates (University of Calgary)
The main challenges faced by oil sands operators are the cost of operations and the environmental intensity of the recovery processes. The Athabasca oil sands deposit contains bitumen with viscosity typically over 1 million cP. To lower the viscosity of the bitumen so that it can be drained from these reservoirs, it is heated with injected steam by using Steam-Assisted Gravity Drainage (SAGD). This process is effective and enables recovery factors over 60%. The major cost in the recovery process is steam generation and associated water treatment and handling. The combustion of natural gas to generate steam is the main origin of the carbon dioxide emissions associated with SAGD. An alternative to steam injection is the use of solvents co-injected with steam. Solvents dilute bitumen leading to an oil phase with reduced viscosity. Also, there is potential to recycle solvent for re-injection. Thus, solvent added to steam can improve the steam-to-oil ratio and as a consequence can lower the carbon dioxide emissions per unit volume oil produced. In this extended abstract, we describe a phased solvent and heat process that yields improved performance beyond that of SAGD and current solvent-aided SAGD processes.